Pangigapo na Produkto
Say Magpow Polyurethane PU Foam 750ml et maabig parad panpano na saray kasukasuan, pangiter na thermal insulation, tan pangiseguro ed saray materyales ed panagpaalagey diad saray aplikasyon ed konstruksion.
PU FOAM ED PU FOAM
Say 750ml ya Expanding Polyurethane Foam et sakey a kabiangan, pre- ya inlaok lan solusyon. Say pananginan et walaan na plastik ya inkabit ya ginawa parad sakey a propesyonal a foam dispensing gun odino sakey a single-use applicator tip. Say foam et onkiwas no onsabi ed danum na atmospera, ya onlaknab tan onawet. Saya so mausa-usar ed nanduruman kimey ed panagpaalagey tan maong so nagagawaan to ed panagpano na saray bakantin pasen, panagseal na saray kasukasuan, tan panagseguro na saray kagawaan. Say produkto et mangiiter na mabiskeg ya panagpeket, ontan met ed superyor ya thermal tan sound insulation.
Amputin Kolor ya PU Foam SARAY TAMPANG NA PRODUKTO
1.Atagey so biskeg na panag-apiger ed nanduruman materyales, singa say UPVC, brickwork, salming, asero, aluminum, kiew, tan mipadparan tapew (ag matukoy parad polypropylene, polyethylene, odino Teflon).
2.Superior void-filling performance.
3.Matukoy ya usaren ed temperaturan walad baetan na +5℃tan +35 degree.
4.Ideal operating temperature range: +18℃anggad +25℃.
5.Eco-conscious formulation: Manguusar na non-CFC propellants tan ag makaderal ed ozone layer.
Teknikal a Tampok
|
Base |
Polyurethane |
|
Maparanay |
Malet ya Bula |
|
Sistema na Panagpaabig |
Moisture-cure |
|
Tack-Libren Panaon (min) |
8~15 |
|
Panaon na Pamamaga |
Anggapoy dabok kayari 20-25 min. |
|
Panaon na Panputot (oras) |
4~6 (+25℃) |
|
6~12 (-25℃) |
|
|
Ani (L) |
30~35 |
|
Memmelag |
Angapo |
|
Kayari na Palaknab |
Angapo |
|
Istruktura na Selula |
60~65% ya lukas iran selula |
|
Espesipikon Grabidad (kg/m3) |
17~22 |
|
Panangilaban ed Petang |
-40℃~+80 degree |
|
Temperatura na Aplikasyon |
+5℃~+35 degree |
|
Kolor |
Champagne |
|
Fire Class (DIN 4102 ) |
B3 |
|
Insulation Factor (Mw/mk) |
<36 |
|
Compressive Strength (kPa) |
>100 |
|
Say biskeg na panag-awit (kPa) |
>28 (10%) |
|
Adhesive Strength(kPa) |
>75 |
|
Panagsepsep na Danum (ML) |
0.5~2(anggapoy epidermis) |
|
<0.5(with epidermis) |
LUGAR NA APLIKASYON
Pantipon na Puerta tan Bintana:Say pangipaalagey, pangi-insulate, tan pangi-angkla ed saray frame na puerta tan bintana.
Gap tan Joint Filling:Panseal tan panpano ed saray bitak, tahi, lukas, tan saray kulang ed saray tapew na konstruksion.
Insulation Attachment:Pankasakey na saray insulation layers tan saray fastening components ed saray sistema na atep.
Kaslakan ya Pankakabit tan Pangipuesto:Parad adhesive-based bonding tan hardware-based mounting ya uusaren.
Proteksion ed Utility:Mangiter na insulasyon ed kaliberliber na saray kagawaan na kuryente tan saray linya na tubo.
Thermal & Sound Control:Mangiter na heat retention, cold blocking, tan noise reduction.
Proteksion ya Pambalot:Manbabalot na saray mabmablin maples ya naderal ya bengatla parad ag-onyegyeg, ag-onkukurang ed pressure- ya transportasyon.
INSTRUKSYON ED PANGUSAR
Iyugyog a maong so spray can ed loob na ag-onkulang ed 40 segundo. Antis ya iyaplika, linisan tan basaan na daiset iray tapew panamegley na water spray. Ikabit so dispensing gun o tubo ed adapter. I-screw ya maong so lata ed adapter tan i-adjust so flow-control screw. No manpano na saray abot o gap, panoen mo labat iratan na manga kapaldua, ta onlaknab so foam. Iparalan manlapud leksab ya anggad tagey. Say foam et magmaliw ya amagaan ed loob na ngalngalin 10 minuto. Kayari na manga 20 minutos, nayarin putoten so antokaman ya sobra. Say ag-aka-set ya foam et nayarin linisan panamegley na GNS Foam Cleaner odino acetone. No sigpot lan onabig, say foam et naekal labat panamegley na mekanikal a paraan.
1.Panparaan na Lata: Iyugyog so lata ya walay presyon to ed loob na ag-onkulang ed 40 segundo antis ya iyaplika.
2.Panparaan ed Tapew: Linisan ya maong so lugar tan basaen na daiset panamegley na spray na danum. Saray tapew et nepeg ya ambetel, aliwan napno.
3.Pangikabit na Dispenser: Ipeket a maong so foam gun odino single-use tube ed adapter na lata.
4.Pangikabit na Lata: Ipeket a malet so lata ed adapter. No wala, usaren so flow adjustment screw ed paltog pian naregula so output.
5.Foam Application:
-Panoen iray lukas, bitak, tan bakantin pasen manlapud leksab ya anggad tagey.
-Panoen labat ya anggad kapaldua, ya mangitilak na pasen parad foam ya onlaknab legan ya onlelereg.
Proseso na Pangiparaan:
-Say foam et mamagaan no diwiten ed loob na manga 10 minutos.
-Say panag-trim et nayarin gawaen kayari na manga 20 minutos.
7.Panaglinis:
-Basa/ag-inmawet ya bula: Linisan a tampol na GNS Foam Cleaner odino acetone.
-Fully cured foam: Kaukolan ya ekalen (panputot odino pan-sand).
PANAG-IMPON TAN PANAG-ISIPAN
Iyan ed ambetel tan maong so dagem.
Iyan ya lanang ya akaarap ed tagey so balbula.
PANAG-IMPAKE
750ml/lata, 500ml/lata,12pcs/lata, klase na dayami tan klase na paltog.
